You do not need a laptop to operate the EXAMINER!
The EXAMINER itself is a portable touch screen computer.
it has no buttons, switches or adjustments, to operate it simply use the stylus pen
or your finger tip on the TFT lcd

EXAMINER has 3 integrated systems for the price of one:

>• GEOPHYSICAL - for the detection, and graphical separation of metal targets
from voids and other geological features.
Uses ground transmitting and receiving probes for data collection.
The geophysical system is offered either in 4 probe or 22 probe operation.
>• MAGNETOMETER - a super sensitive 80cm. gradiometer antenna reveals
soil magnetic field disturbances caused by voids, ferrous metals, foundations, walls
>• METAL DETECTOR - for selective rejection of non valuable metal targets
Compare results from all 3 systems on the survey area, to increase reliability for the suspected targets

Underground images in real time:

No time lost to record the area and then send data to a computer to see what you have found.
As you walk with the sensors or while you moving the probes depending the mode you use  the EXAMINER shows the underground image immediately.
Professional users can also use filters to reveal the images manually adjusting the target strength
from the background soil interference.

Choose the graphics you want before or while you investigate:
3 high resolution graphic types offered to select from
>GRID: The basic graph - grid blocks are colored according the data variations,
has a target depth calculator and co-ordinate indication, this way you see exactly
where the target is and you can pinpoint it again at your next visit.
>2D CONTOUR: The high resolution graph - that smooths out the targets shapes
outlining their properties, colorful and detailed.
>3D: The highest resolution ever rotatable graph - select the area part you want,
or just click on 3D to see the whole 3D view of underground
that is automatically rotatable to investigate target shapes from any viewing angle,
from 0 to 360 degrees. Numerous features for all graphic types assist to target analysis.
>World war II bunker found by one of our customers.

Select the best sweep direction:

According to the field layout, the obstacles on your way and your starting position,
8 sweep directions are offered. Choose the suitable direction you want to investigate the field,
before starting the survey.
Unlike other systems the user is not limited to search only from right to left.
Enter to the EXAMINER computer how many sweep lines and steps per line you estimate
are needed to walk the area. The EXAMINER will then prompt you to step or to turn to the next sweep line
with voice commands!

2 Data collection modes manual and auto:

For uneven ground when a standard pace cannot maintained, select manual mode,
then after every step you make or probes you move (depending the mode used),
click on “CAPTURE” and see what is found.
On flat ground use auto mode, and input to the computer the time (seconds) needed to make a step, click “START”.
The computer will give you voice and visual signals when to step, turn or complete the survey.
Your ears prompt you to step, turn or stop and your eyes see the results immediately.
If you encounter obstacles on your way like trees or rocks you can pause the data collection,
pass the obstacle and start it again

New "replay" function assures that no target is left behind:
A stored image at the EXAMINER hard disk, can be imported back anytime
and be viewed using the "replay" function. The user can relax at the comfort of his home
and select the "replay" to see the survey step by step again on the EXAMINER screen,
the EXAMINER imitates the exact steps, sweep direction and data presentation of the original survey.
The "replay" is a unique EXAMINER feature.
The screen goes blank and just like a puzzle the image is re appearing.
This is not only a "movie" of the original data capture. Use the "replay" and compare investigations
from different sweep directions and EXAMINER modes on the same site, to validate your target.
Often small but valuable targets lying near big ones are masked and are not visible.
The "replay" guarantees that a weak response of either a small
or a very deep target will be clearly viewable,
then as the "replay" continues and the big target is encountered the small one will fade.
It is up to you to investigate again on the suspected target area,
leave the big target out of your new survey by selecting another sweep direction
and then compare the images.

The EXAMINER makes the full target image analysis and target depth calculation immediately on the field.
No need to transfer the data file to a laptop to see images in higher resolution!
you do not pay additional money for extra software just for indicating depth.

• Technical Specifications

Display : Backlight 8.4” TFT LCD SVGA Panel 800 x 600 Resolution
Computer : 1GHz Processor INTEL i586- compatible
Input Device : Resistive Touch Panel
Operating System : Windows XP
BIOS System : Whizpro Bios, APM 1.2
Working Memory : 512MB DDR-RAM
Data Memory : 40GB HDD
Feedback : voice, visual
Dimensions & Weight : 231mm x 192mm x 42mm / 1.19kg (with Battery)
Accessories : Stylus Pen, AC/DC adapter, Power Cord, Protective bag
Safety Certification : EMI FCC / CE / TUV / GOST
Battery : Removable Li-ion Standard Battery Pack Supports up to 4 hours
Charging Time (Battery fully discharged) : ca. 2 Hours
Rubber carry bag and neck straps

• 3 integrated systems

Geophysical. 4 or 22 probe resistivity measurement. Manual ground cancel control
to work in all soil types
Gradiometer. 80cm. antenna. Automatic ground cancel
Metal Detector with discrimination. Manual ground cancel control
Other optional antenna systems are under development!

• Standard equipment
>-EXAMINER Computer,
>-Interface,
>-Geophysical 4 probes / cables, in watertight case

• Additional equipment
>-Geophysical 22 probes module, 22 probes with their 2 x 17m multi cables,
>-Magnetometer in hard carry case,
>-Metal Detector